Development of QSARs to investigate the bacterial toxicity and biotransformation potential of aromatic heterocylic compounds

A series of aromatic heterocyclic and hydrocarbon compounds were tested for toxicity and biotransformation potential against two contrasting lux-marked whole-cell microbial biosensors. Toxicity was determined by inhibition of light output of a Pseudomonas fluorescens construct that expresses lux constitutively. Biotransformation was tested by increase in light output of P. fluorescens HK44 (pUTK21), which expresses lux when in the presence of a metabolic intermediate (salicylate). The data were then modelled against physical/chemical properties of the compounds tested to see if quantitative structure–activity relationships (QSARs) could be derived. Toxicity was found to be accurately predicted by log K_ow (R²=0.95, Q²=0.88), with the basic (pyridine-ring containing) heterocycles modelled separately. The biotransformation data were best modelled using lowest unoccupied molecular orbital (LUMO) energies (R²=0.90, Q²=0.87).     

水源水生物预处理反应器微生物学特征

处理微污染水源水的生物陶粒反应器中，细菌的数量分布具有一定的区域化特征，上层生物陶粒的细菌数量较中、下层生物陶粒的细菌数量分别高１～２个数量级。从生物陶粒反应器中分离出７２株细菌，其中最多的是假单胞菌属，占４４．６％，其次为克雷伯氏菌属细菌，占２ｌ．６％。另外还分离到芽孢杆菌属、不动细菌属、黄单胞菌属和邻单胞菌金的细菌。除芽孢杆菌属外，其它各属细菌生反应器中的分布特征是上层多，下层少。     

美姑河牛牛坝水电站库区泥石流基本特征

金沙江支流美姑河牛牛坝水电站库区泥石流沟分布面积广、发生频率高。调查结果表明库区现有不同类型泥石流沟31条,其中属于高度危险的泥石流沟4条,中度危险的泥石流沟15条。本文对流域面积较大、活动性较强的12条泥石流的容重、设计流速、流量、冲出量等重要工程参数进行了计算,并对水库蓄水后的泥石流沟状况与发展趋势作了进一步分析,研究表明在水库施工期泥石流灾害对工程建设有较严重的影响,特别是靠近库首的泥石流对工程的安全构成威胁。水库蓄水后,库区泥石流活动程度有所降低,不会明显影响水电站正常运行。     

Pyrolysis of low-density polyethylene using synthetic catalysts produced from fly ash

Catalytic pyrolysis of low-density polyethylene (LDPE) was investigated using various fly ash-derived silica–alumina catalysts (FSAs). FSAs were prepared by a simple activation method that basically includes NaOH treatment of fly ash by a fusion method, followed by an aging process. A series of LDPE pyrolysis experiments was conducted and the catalytic performance of FSAs was assessed in terms of the degradation temperature and the simulated boiling point distribution of the liquid products. The effects of synthesis conditions such as NaOH/fly ash weight ratio and aging time were examined by X-ray diffractometer (XRD), Brunauer-Emmett-Teller (BET) surface area analyzer, and scanning electron microscope to clarify the controlling factors affecting the catalytic activity. To obtain catalyst with high activity, it is necessary to produce sufficient silica and alumina species that can be easily co-precipitated into solid acid catalyst by destruction of the fly ash structure and to optimize the activation time for catalyst synthesis to prevent the transformation into inactive phases. The catalytic performance of FSA obtained from optimal conditions was equivalent to that of commercial catalysts, demonstrating the effectiveness of the catalyst.     

特色育人和谐发展——试析中国环境管理干部学院办学理念

中国环境管理干部学院在各项工作中实践着特色育人的思想.学院坚持“以服务社会需求为导向,以提高教育教学质量为核心,以培养高素质、高技能人才为根本,培养大学精神,积淀大学文化,铸就大学灵魂,彰显环境教育特色,创建绿色和谐校园“的办学理念,发挥了环境教育特色所带来的优势,注重遵循教育发展的规律,取得了可喜的办学成绩.     

试论长江中游沿岸地区区域环境特征与洪涝灾害

首先论述了长江中游沿岸地区的区域环境基本特征:①以平原为主体的层状地表结构;②亚热带季风气候;③河网密布,湖泊众多;④过渡性的土壤和植被。然后分析了该区洪涝灾害的概况,揭示了洪涝灾害的自然原因与人为影响。     

湖北省旱涝灾害的若干统计特征及对农业生产的影响

着重分析了湖北省４０多年来旱涝灾害的若干统计特征及其对农业生产的影响，指出了旱涝灾害的演变趋势，以及人类活动对灾害加剧的主导作用，为防、抗旱涝灾害提供参考。     

基于多传感器融合的林火监测

为了提高近距离火灾监测的准确率,建立了基于Arduino平台的多传感器实时监测系统.此系统安装在移动机器人身上以探测火灾.在林火发生期间,会产生CO、C02明火火焰及其他产物,并引起周围环境温度的升高.因此,选择合适的传感器,检测出以上参数,就有可能据此判断实际环境是否有火.通过在Arduino上搭建火焰传感器、温度传感器、气体传感器和烟雾传感器,可以实时监测环境参数.在无火和有火环境中进行了多次试验,进行数据采集,得到了大量原始数据.无火环境的数据是在不同的天气条件下测得的;有火环境由试验火堆模拟得到.在模拟的过程中,进行人为操作以模拟不同的火情.如通过浇湿底部的可燃物模拟预热阶段,试验数据因此更有代表性.数据分析表明,单个传感器的输出值波动大,且在有火环境和无火环境中的输出值有重叠.因此,用单一传感器来检测火灾的准确率很低.而同时分析3个传感器的输出值时,其输出值随所检测火堆的不同呈现出一致的变化规律.最后,利用神经网络进行多传感器数据融合.涉及5个输入变量,由神经网络实现对多变量的非线性问题进行模式识别.将前述试验所得数据划分为训练数据和测试数据,两类数据均包含一定比例的有火样本和无火样本.用训练数据对BP神经网络进行训练,可得到林火识别模型.用测试数据检验模型,结果表明,该BP神经网络对试验火的识别准确率为98.625％.     

吸附融合菌的固定化及对铬吸附特性研究

研究了融合菌的固定化方法及吸附特性,结果表明:1.5%海藻酸钠为包埋剂包埋50 g/L融合菌可制成物理和吸附性能较好的固定化吸附剂;40 g/L(约含5 g/L融合菌)的固定化吸附剂对30 mg/L含Cr废水的去除率可达94.54%;当投加量为50 g/L(约含6 g/L融合菌)时,固定化吸附剂可完全去除实际电镀废水(pH:2.67,Cu:1.70 mg/L,Cr:20.62 mg/L,N i:29.97 mg/L,Zn:1.11 mg/L)中的Cu和Cr,且对N i和Zn的去除率也分别达到了48.05%和61.09%;吸附过程符合准二级吸附动力学模型;填充柱工艺适用于固定化吸附剂连续处理含铬废水,当流速为150 mL/h和250 mL/h时填充柱一次稳定处理水量分别为7.2 L和11.5 L,且延长水力停留时间可提高出水水质。